Das LDO VORON V2.4 Printer Kit beinhaltet folgende Komponenten und Filamente:

• Toolhead & Breakout PCB based
• the popular hartk design.
• Pre cut & Pre wired cables
• Input Shaper Toolkit (ADXL345)
• Keenovo Silicon Heater
• Bigtreetech Octopus V1.1 Controller
• Genuine Bondtech BMG dual drive gears
• Genuine Gates 2GT belts
• LDO selected hardwares & Brass Heatset
• Insert Tool
• Nevermore Filter kit included
• Klicky mod kit included
• LED lighting kit included

• 1x  SupCRprobe BlackEdition
• 2x 1kg CR-3D ABS Schwarz Hauptfarbe  (ABS Sortiment) -> falls Sie eine andere Farbe wünschen, bitten wir um einen Kommentar
• 1x 1kg CR-3D ABS Wasserblau Akzentfarbe ( ABS Sortiment) -> falls Sie eine andere Farbe wünschen, bitten wir um einen Kommentar

Die komplette Inhaltsbeschreibung finden Sie hier.

Es müssen lediglich die gedruckten Teile angefertigt werden und dann kann es losgehen!

Das passende Hotend findet Ihr ebenfalls bei uns im Shop

Features and extras

• Stainless Steel Linear Rails 12H size rails for X axis included. You’ll still want to grease these rails, but you can do it at the end of your build
• Toolhead PCB Our kit includes a modified hartk toolhead PCB . In addition, we designed a toolhead breakout PCB to make wiring at the controller end simple and straightforward.
• Brass Heatset Insert Tool We’ve included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check here for more information.
• Input Shaper Tool We thew in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free
• Pre cut & Pre wired Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See our detailed wiring guide here
• LED Lighting Bring lighting to your Voron with included LED strips and all necessary wiring!
• Nevermore Filter We include parts for a optional internal circulation filter: the Nevermore Micro V5 by 0ndsk4 (carbon pellets not included due to shipping restrictions)
• Klicky Mod Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional Klicky mod by jlas1
• Small Tools We include a small set of hex wrenches for all the fasteners used in the build
• (Preparing your own set set of good quality hex wrenches is still recommended). Also included is a small flat head screw driver that is useful in a surprising numerous situations
• 2mm Drill Bit Metric drill bits may not be very common in some parts of the world, so we
• included one. Use it to ream the filament path in your printed extruder parts

Guides

• Printed Parts Guide (LDO supplement) – Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.
• Wiring Guide – LDO created this supplementary wiring guide to make wiring your printer a breeze

Build Videos

• Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_0_questions channel.
• Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when the manual is ambiguous or unclear.
• Get a official serial number once you finish building your Voron.

Lieferumfang des LDO VORON V2.4 Printer Kit

• 1 x LDO Voron V2 Drucker Bausatz mit schwarzen Profilen (nicht mit farbigen Profilen, wie auf irgendwelchen Abbildungen zu sehen)
• +  zusätzliche Spulen original CR-3D ABS Filament.
• Wichtig: Die benötigten 3D-gedruckten Teile und das Hotend sind (wie bei RepRap-Druckern üblich) nicht im Lieferumfang

Der Beitrag LDO VORON V2.4 Printer Kit+CR-3D Filament erschien zuerst auf CR-3D.

Das LDO VORON V0.1 Printer Kit beinhaltet folgende Komponenten und Filamente:

• LDO Frame (Farbe Schwarz)
• LDO V0.1 Motor Kit
• LDO Rail Kit
• Phaetus Dragonfly BMO
• Pre Made Wire kit
• Fans, heaters, buck converter, hardware, tools
• 2 Flex Build plates (one powder coated and one smooth PEI) and magnet
• Cast aluminum bed
• Raspberry Pi 3B
• Meanwell LRS-150-24
• SKR Mini
• Acrylic enclosure
• CR-3D ABS Hauptfarbe  (Teilen Sie uns die gewünschte Hauptfarbe aus unserem ABS Sortiment mit)
• CR-3D ABS Akzentfarbe (Teilen Sie uns die gewünschte Akzentfarbe aus unserem ABS Sortiment mit)

Die komplette Inhaltsbeschreibung finden Sie hier.

Es müssen lediglich die gedruckten Teile angefertigt werden und dann kann es losgehen!

Features and extras

• Stainless Steel Linear Rails – That’s right, no more worrying about rusty rails. You’ll still want to grease these rails, but you can do it at the end of your build.
• Machined Rail Nuts – Our kit includes 5 custom machined T nuts to secure the linear rails onto the extrusions, (no need to fiddle with tiny m2 nuts on a thin plastic part)
• Brass Insert Tool – We’ve included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check here for more information.
• Pre-cut & Pre-wired – Our kit includes all necessary wiring: cut to just the right length and pre-crimped or soldered to their respective parts. See our supplementary wiring guide here.
• Two Types of Nuts – We’ve included both black oxide hex nuts and stainless square nuts in our kit, use whichever type you prefer.
• Partially Threaded Screws – The small pack of partially threaded SHCS screws (M3x30/x35) are for the mini-afterburner, they help reduce wear on the idler and Latch parts.
• Hex Wrenches – We found that 1.5mm hex wrenches wear out easily, so we threw in a bunch of them. However, you should definitely still buy a set of good quality hex wrenches.
• Threadlocker – We included a small tube of threadlocker. Use it on all the grub(set) screws.
• 2mm Drill Bit – Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.

Guides

• Printed Parts Guide (LDO supplement) – Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.
• Wiring Guide – LDO created this supplementary wiring guide to make wiring your printer a breeze.
• Nuts in 1515 Extrusions – See our 1515 short nut guide here for tips on handling nuts in 1515 aluminum extrusions.

Build Videos

• Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_0_questions channel.
• Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when the manual is ambiguous or unclear.
• Get a official serial number once you finish building your Voron.

Lieferumfang des LDO VORON V0.1 Printer Kit

• 1 x LDO Voron V0.1 Drucker Bausatz Mit Raspberry Pi mit schwarzen Profilen (nicht mit farbigen Profilen, wie auf einigen Abbildungen zu sehen)
• + 2 zusätzliche Spulen original CR-3D ABS Filament, je 1kg (Farben nach Wahl).
• Wichtig: Die benötigten 3D-gedruckten Teile sind (wie bei RepRap-Druckern üblich) nicht im Lieferumfang

• Das Paket umfasst diese Teile:

Der Beitrag LDO VORON V0.1 Printer Kit + CR-3D Filament erschien zuerst auf CR-3D.